Case Dossier 01 · Performance Acoustics

Suspended Laminated Birch Canopy for a 420-Seat Chamber Hall

Small shoebox timber halls face a delicate geometric tension: ceiling heights generous enough to build 1.7 seconds of late-field orchestral bloom (`V/N` ≈ 9.4 m³ per seat) often delay first overhead reflections beyond 45 milliseconds on stage, leaving string quartets unable to hear bowed attacks across the ensemble.

1. Ray-Tracing & Wave-Based Boundary Modeling

Using hybrid geometric ray-tracing above 700 Hz paired with finite-element wave modeling below the Schroeder frequency (`f_s` = 148 Hz), we designed an array of fourteen doubly curved, cross-laminated Finnish birch petals (`38 kg/m²` surface mass density) suspended on silent steel wire winches 6.2 to 8.4 meters above the stage apron.

  • Open-Gap Low-Frequency Coupling: Spacing adjacent petals by 280 mm allows bass energy below 250 Hz to couple freely into the upper structural timber volume, preserving warm cello and double-bass decay (`BR` Bass Ratio = 1.18).
  • Stage Ensemble Support (`STEarly`): Convex underside radii scatter high-frequency violin harmonics evenly across the 11-meter stage width without focusing comb-filtered hot spots at the conductor podium.

2. Measured Unoccupied vs. Occupied Octave-Band Results

Parameter 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz
RT60 Occupied (s) 2.04 1.89 1.74 1.70 1.63 1.44
Clarity `C80` (dB) -1.8 -0.9 +0.6 +1.1 +1.7 +2.4
Lateral Fraction `LF80` 0.21 0.24 0.27 0.26 0.23 0.19
Upholstery Absorption Matching: Custom wool-upholstered beech auditorium seats were tested inside a reverberation chamber per ISO 354 prior to installation so unoccupied rehearsal acoustics shift by less than 0.12 seconds when a 420-person audience enters.